Light Therapy

** Cocoon orders will be shipped directly from our manufacturer. Please allow ~3 - 4 weeks for delivery **

Thank you for your patience and understanding!

The metamorphosis of your health begins here! The Cocoon is the newest innovative red light therapy product with BioLight's patent-pending technology that iterates on the full-body, flexible features of the Matrix mat and literally adds another dimension to your treatments. 

Not only is the Cocoon a full-body apparatus, but now you can irradiate yourself with red and/or near-infrared (NIR) in 360-degrees at once! The Cocoon is svelte, yet roomy inside with a flexible frame making it the unmatched portable whole body device of choice. 

The Cocoon provides you with the luxurious treatment of a red light therapy bed (i.e., red light therapy "tanning beds" found in med spas, clinics, alternative practitioner's offices), but in the convenience of your home. Not to mention, its uber-flexible characteristics make it extremely portable and further adding to the amazing versatility of this product

Since you will be surrounded by red and NIR LEDs, you will be feeling the warmth from all angles. While this will not be the same heat people associate with infrared saunas (which utilize predominantly mid- and far-infrared light), you will likely perspire, and possibly sweat, during your Cocoon session. With that in mind, the entire interior material is a vinyl plastic that make it incredibly easy to wipe down and clean between treatments.

When enclosed via the zipper mechanism, the Cocoon's measurements are 69" x 35.4". But you also have the option to full unzip the pod and turn it into a mat, providing a massive platform to lay, stretch, perform yoga, tai chi, chi gong, etc. on top of or just use as relaxing ambiance lighting. When fully opened, the dimensions are 69" x 71".

The Cocoon has a controller to each half of the pod that provides the following options:

• Light setting: red/NIR light combo, red light only, NIR light only
• Light intensity: 5 levels (light irradiance for each listed below)
• Timer: 5 minute intervals, up to 30 minutes; or timer off

Package includes:

• Cocoon pod
• Travel/carrying bag
• Remote controllers (1 for each half of the pod)
• Power plug & power adapters
• Owner's Manual
• Red Light Therapy Treatment Protocols eBook

Cocoon Specs

• Dimensions: 69" x 35" x 2"
• Weight: 17.4 lbs
• Number of LEDs: 3600
• Irradiance (measured at 0"):
• Level 5: 0.88 mW/cm²
• Level 4: 0.70 mW/cm²
• Level 3: 0.55 mW/cm²
• Level 2: 0.36 mW/cm²
• Level 1: 0.043 mW/cm²
• Mat material: External -  ; Internal - vinyl plastic 
• Light flicker: 1.2% modulation, 60Hz 
• EMF Emission (see picture below regarding safe levels): 
• Standard magnetic: 0.2 mG
• Standard electric: 47 V/m*
• Weighted magnetic: 0.8 mG
• Weighted electric: 48V/m*
• RF: 0.005 mW/m²
• *for comparison, PEMF mat EMFs = 900 V/m
• Light Spectrum: 660nm (red) & 850nm (near-infrared)
• Three light settings: red/NIR light combo, red light only, NIR light only
• Programmable timer: 5, 10, 15, 20, 25 or 30 minutes; optional timer off
• Power: 200W
• Electrical Input: 100-240VAC 50/60Hz
• LED Lifespan: 100,000 Hours
• Return Period: 60 days
• Warranty: 3 Years

The below is a photo from the owner's manual of the Tri-Field EMF Meter:

Third Party Test Results

** ReJuvenate orders will be shipped directly from our manufacturer. Please allow ~3 - 4 weeks for delivery **

Thank you for your patience and understanding!

Rejuvenate (v.):

:to make young or youthful again: give new vigor to

:to make someone look or feel young and energetic again

:to restore to an original or new state

By far our largest panel, measuring in at 66" tall and 17" wide. This ReJuvenate is 3" taller and 6" wider and includes over 300+ more LEDs than our previous model! 

This upgraded ReJuvenate panel is the first generation of this model to also integrate pulsed frequencies AND allow for manual adjustment of the light brightness!

This updated version of the ReJuvenate has multiple upgrades to an already cutting-edge red light therapy panel:

• No more physical buttons — now you control everything on a touch screen!

• Light settings: red/NIR light combo, red light only & NIR light only

• Adjustable timer

• Adjustable light irradiance (from 1 - 100% brightness)

• Adjustable pulsed frequencies (from 0 - 10,000 Hz)

Adjustable light irradiance: Being able the adjust the brightness/power of the light allows you to further fine-tune and dictate your treatment dosage. For example, the skin and the eyes require very low treatment dosages whereas the brain, bones and nerves require much higher treatment dosages in order to realize beneficial results. By being able to manually adjust the light irradiance, you can now lower the light power to assure that you won't be "overdosing" for those conditions that require less light energy or you can increase the light irradiance to augment those conditions that require larger amounts of light energy.

Adjustable pulsed frequencies: Research has demonstrated that various pulsed frequencies of light can be beneficial for specific conditions. For example, a study utilizing 40 Hz oscillations has been shown to be especially beneficial for mitigating and/or reversing signs and symptoms of cognitive decline that precede Alzheimer's disease.

Leading the red light therapy space in safety, BioLight panels incorporate the lowest light flicker on the market and the lowest EMF emissions possible.

At the end of the day, you are getting the best of all worlds with BioLight: superior light therapy innovation, education/protocol treatments, safety and superior customer service!

Package Includes

• ReJuvenate panel with power plug of your respective country

• Protective eyewear

• Owner's manual

• The Red Light Therapy Guide ebook

• Optional mobile stand (choose at time of purchase)

ReJuvenate Specs

• Dimensions: 66" x 23" 3"

• Weight: 65 lbs

• LEDs: 1008

• Light Irradiance (@6"): 56.9 mW/cm²

• Light flicker: 1.2% modulation, 60Hz 

• EMF Emission (see picture below for safe levels):

  • Standard magnetic: 0.3 mG

  • Standard electric: 30 V/m

  • Weighted magnetic: 0.3 mG

  • Weighted electric: 24V/m

  • RF: 0.15 mW/m²

• Light Spectrum: 660nm (red) & 850nm (infrared)

• Light settings: all red, all NIR & combo red/NIR

• Focusing Lens Beam Angle: 30°

• Cooling fans: 20 Fans

• Power: 3000W

• Lifespan: 100,000 Hrs

• Programmable timer

• Warranty: 3 Years

The below is a photo from the owner's manual of the Tri-Field EMF Meter:

The Adapt System is BioLight's innovative, cutting-edge take on full-body, 360° red light therapy treatments: the Adapt Table & the Adapt Panel.

Red light therapy beds can be bulky, take up too much room and are extremely heavy; this makes them one-dimensional and difficult to move around. The Adapt System provides you with the effectiveness of a full 360° treatment while also bestowing unparalleled versatility between the mobile Adapt Table and the incredibly adaptable Adapt Panel, which can be  rotated 360° and positioned precisely to your liking.

Also, the Adapt System offers customizable wavelengths. That means when ordering, you will add a note in your order (or simply email info@biolight.shop) with your preferred wavelength of red light (620 - 750nm) and your preferred wavelength of near-infrared light (800 - 1,000nm). If you are not sure what wavelengths you want and/or want help deciding which would be best, given what you are wanting to use red light therapy for, we will put you in contact with BioLight's founder & CEO, Dr. Mike Belkowski, to help you decide!

Lastly, the Adapt Table has adjustable light pulsing from 1 - 9,999 Hz, providing you with the ultimate flexibility to provide the patient/client with the healing frequency you see fit. Recent photobiomodulation research has demonstrated that various pulsing frequencies of light can be beneficial for specific conditions. For example, a study utilizing 40 Hz oscillations has been shown to be especially beneficial for mitigating and/or reversing signs and symptoms of cognitive decline that precede Alzheimer's disease.

Adapt Table

The Adapt Table is a must-have for any practitioner, med spa, recovery center, etc. that wants to integrate red light therapy. Instead of standing up for treatments, clients can comfortably lay down.

One of the innovative aspects of the Adapt Table is its ability to modulate the intensity of the light. With the simple turn of a knob on the side of the table (pictured below), you can easily modify the light intensity from 1 - 100%. This adds endless versatility to red light therapy sessions, depending on your goals.

Of course, along with being able to easily alter the intensity of the light with the side panel, you are also able to choose your light setting (red/NIR light combo, red light only or NIR light only) and treatment duration.

Adapt Table Specs

• Dimensions: 75" x 27" x 7.7"

• Weight of table: 202 lbs

• Max weight on table: 600 lbs

• Number of LEDs: 1000

• Wavelength: Customizable. 620 - 750nm (red) & 800 - 1,000nm (near-infrared) Can choose one or multiple wavelengths of each spectra.

• Three light settings: red/NIR light combo, red light only, NIR light only

• Irradiance:  80 mW/cm² @ 0" at 100% intensity

• Light Pulsing: 1 - 9,999 Hz

• Light flicker: 1.2% modulation, 60Hz 

• EMF Emission*: 0.1  µT @ 0"

• Programmable timer

• Power consumption: 1450W

• Electrical Input: 100-240VAC 50/60Hz (meaning the table works both with US/Canada and international power supply)

• LED Lifespan: 100,000 Hours

• Return Period: 60 days

• Warranty: 5 Years

*For reference: near the surface, the fields can be, for example, 2000 µT for hairdryers and electric shavers, 800 µT for vacuum cleaners, and 50 µT for washing machines and televisions.

Adapt Panel

For a full-body panel, the Adapt Panel is unmatched! Not only can the height of the panel be adjusted via its powered mobile stand, but you can also rotate the panel 360° to angle it to your exact preference.

And just like the Adapt Table, the Adapt Panel offers customizable wavelengths. When purchasing the System or the Panel, you will have to provide us with your desired red and near-infrared wavelengths. If you would like assistance deciding which wavelengths would be best for your desired goals, we will put you in contact with BioLight founder and CEO, Dr. Mike Belkowski, to help you with that determination.

Also, like the Adapt Table, the light irradiance of the Adapt Panel can be modulated from 1 - 100% intensity, providing you with optimal adaptability.

Like all BioLight products, the light irradiance has been chosen based on the current photobiomodulation research as well as reducing EMFs and light flicker as low as possible. At 6" and beyond, the EMFs are virtually zero.

Adapt Panel Specs

• Dimensions: 75" x 25" x 4"

• Weight of panel: 206 lbs

• Number of LEDs: 1000

• Wavelength: Customizable. 620 - 750nm (red) & 800 - 1,000nm (near-infrared) Can choose one or multiple wavelengths of each spectra.

• Three light settings: red/NIR light combo, red light only, NIR light only

• Irradiance @ 6": 

• 100% intensity: 80 mW/cm²

• 75%: 66 mW/cm²

• 50%: 49 mW/cm²

• 25%: 24 mW/cm²

• 1%: 15 mW/cm²

• Light Pulsing: 1 - 9,999 Hz

• Light flicker: 1.2% modulation, 60Hz 

• EMF Emission*: 0.1  µT @ 0"

• Programmable timer

• Power consumption: 1450W

• Electrical Input: 100-240VAC 50/60Hz (meaning the panel works both with US/Canada and international power supply)

• LED Lifespan: 100,000 Hours

• Return Period: 60 days

• Warranty: 5 Years

*For reference: near the surface, the fields can be, for example, 2000 µT for hairdryers and electric shavers, 800 µT for vacuum cleaners, and 50 µT for washing machines and televisions.